Separate names with a comma.
I always start and warmup my boat at home on muffs before leaving so I know it will start at the ramp. No dead battery or flooded engine or first...
It is important that you have shutters in place to protect the motor, and if they are missing then that means the pieces are in the exhaust system...
Yes those are risers did you notice if the shutter was still in there? That part is very important as it prevents water from entering your exhaust...
If this is a closed cooling system then consider changing the coolant and giving it a good flushing. Also look at the heatexchangers for any...
It looks like this ole girl has been moored for a long time without being looked after. Yep for sure replace the riser hose first and don't forget...
Have seen a boat blow up about thirty feet from me and two others at the fuel dock, fortunately no one was killed only injured. One boat had kids...
If the frame is still solid then just recover it you can get all the supplies from Sailrite and it only takes a sewing machine and a little sewing...
We lost a Lab to cancer back in 2014 when we lived in Alaska. We moved to Las Vegas and it took me awhile to get used to the idea of having...
will try that thanks
No I think I have it in the right area.
I just have a question relating to the outdrive steering pins on a mercruiser pre alpha mr outdrive. Are the parts for the mr different than the...
I have a port outdrive that has a bit of slop both up and down and side to side plus I have a slow leak that I feel is because of steering pin...
I tried a direct hot to the top and center buttons buttons but no response only the bottom button which will lower the outdrive has any response....
Is that where you disconnect the purple and blue wires and connect them together to bypass the trim limit switch? If so I tried that and tried the...
