Loyd Dinneen's Recent Activity

  1. Loyd Dinneen replied to the thread Back to the fridge situation........

    I installed the inverter in the narrow closet below in the cabin. I removed the starboard panel in the forward birth and ran the wires...

    May 27, 2018 at 2:22 PM
  2. Loyd Dinneen replied to the thread Back to the fridge situation........

    I dont know how you made out on the fridge but I thought I would add what I have done. The 77 240 srv I have has had the fridge replaced...

    May 27, 2018 at 1:49 AM
  3. Loyd Dinneen replied to the thread have a 1988 30 weekender. Should all batteries be of the same group?.

    I have installed a 3 bank charger and the instructions indicated that all the batteries should be of the the same group. I do not have a...

    May 27, 2018 at 1:03 AM
  4. Loyd Dinneen replied to the thread 3 bank charger for 30 weekender.

    The charger keeps up really well with all the batteries and with the fridge running and I just installed a second house battery so...

    May 27, 2018 at 12:47 AM
  5. Loyd Dinneen replied to the thread 1975 240 srv weekender.

    I have a 77 240 srv that I have been bring back to original. I had pulled off the starboard outdrive(and the port side too) and replaced...

    May 27, 2018 at 12:38 AM
  6. Loyd Dinneen replied to the thread Trim and tilt problem.

    Have the same problem on my port outdrive and I refilled the pump tank and it started working again. I have a leak somewhere but it is...

    May 27, 2018 at 12:18 AM
  7. Loyd Dinneen replied to the thread Running both engines off one tank, vapor lock?.

    How close is the inlet hose to the carb to a heat source such as a hose the gets warm.

    May 26, 2018 at 11:59 PM
  8. Loyd Dinneen replied to the thread Looking for an engine.

    Saw one posted on Craigs list its under boat parts. Its a complete engine looks drop in ready. The post says it is still in the boat and...

    May 25, 2018 at 1:28 AM
  9. Loyd Dinneen replied to the thread Carburetor issues.

    Rebuilding a 2bbl carb is really simple to rebuild I did mine and it was the hard starting issue fixed it right away. Mine was a...

    May 25, 2018 at 1:26 AM
Show Sidebar