Lazy Daze's latest activity
-
LLazy Daze replied to the thread Cracking and/or Deep Cycle Batteries.12.1 is a goner - it's a dead battery. Check your wiring diagram, but I don't think the bilge pump is hooked up to all 4 batteries, is...
-
LLazy Daze replied to the thread 2011 240 sundeck Head door magnetic latch.Shoot. I thought Southco could at least give you some dimensional drawings that might show the magnet. Then you could try a place like...
-
LLazy Daze replied to the thread trim cylinders with no holes for anode..sure!
-
LLazy Daze replied to the thread 2011 240 sundeck Head door magnetic latch.And....??? :)
-
LLazy Daze replied to the thread 2011 240 sundeck Head door magnetic latch.Contact Southco directly - maybe they can help.
-
LLazy Daze replied to the thread Looking for a port side curved glass windshield for a 1996-97-98 or 1999 Searay 330 Thanks.Salvage yards are your only source for an original - not that it really matters, though. Just keep googling and calling. Marine Glass...
-
LLazy Daze replied to the thread trim cylinders with no holes for anode..The holes you see are for removal/installation of those caps. Yes, you could add clamp-on anodes. Especially if you're in salt (you...
-
LLazy Daze replied to the thread Gelcoat/Fiberglass Repairs Needed?.I wouldn't worry about the one near the rubrail - that will get splashed but will dry pretty much right away, as well. Besides, to fix...
-
LLazy Daze replied to the thread Outdrive Maintenance.I would say AT LEAST every 3 years... realistically, you could go longer... especially since you're in fresh water. There is absolutely...
-
LLazy Daze replied to the thread 1962 Sea Ray 19'.Gotcha. Sea Ray does have some info going back much, much older. I just double checked. I didn't look closely at the brochures, though.
-
LLazy Daze replied to the thread 1962 Sea Ray 19'.What kind of info are you looking for? You can find old brochures on Sea Ray's website - and sometimes you can look to other, close by...
-
LLazy Daze replied to the thread Pull motor to install freeze plugs?.You popped all the casting plugs and had no damage? Play the lottery tonight.
-
LLazy Daze replied to the thread 7.4 only turns 3800 rpms.Good - that is helpful. PSI is funky. Check for good spark at each plug. Drive "trim" use?
-
LLazy Daze replied to the thread R&R Circulating & Sea Pump.I don't think you had ever responded in your other thread about the block... how was it determined that the block is OK? Don't want to...
-
LLazy Daze replied to the thread Water in the Driveshaft Bellow.If you have water, that's pretty much your "check" :) There's no way to pressure test it, if that's what you were after.