Garboard drain plug on a 460DA
Has anyone installed a drain plug? This year I had a new morning cover made for winter storage. I went down to boat this past sunday after the extreme cold spell to find my aft bilge pump well with frozen water that had accumulated over the past couple of months...
Garboard drain plug
Has anyone installed a drain plug? This year I had a new morning cover made for winter storage. I went down to boat this past sunday after the extreme cold spell to find my aft bilge pump well with frozen water that had accumulated over the past couple of months. now thinking...
Mark, You are correct.
Wait a min.......a standard 454/7.4L engine is Left handed.
Reverse rotation is a Right handed motor.
Thanks for straightening that out.
Both motors are right handed. the transitions are what makes counter rotation. starters are same. if you have the one out bring it to a shop they will test for you. it can be rebuilt.
Alex,
You have to De-winterize it! Like the rest of your water system. After you flush the water tank, make about three or four batches of ice-cubs. no more pink.
Alex,
I winterize my water tank as normal procedure (pink). simply let your ice maker go through cycle and make pink slush. the water line to ice-maker now has pink antifreeze. One tip for water system don't forget every faucet run to pink also galley sink sprayer.
I have a question. Boat on hard will like to plug in AC for power. Like to turn on converter to charge all batteries. I'm located about 85' from
electrical box.Need to run extension cords. I have a split-er to go from 50amp to two 30amp. with adapters will two 110 extensions work?
Russ, SANDY,SANDY,SANDY I have not able to start to tell you of the devastation down the Jersey shore. Check out this site for areal views.
http://coastal.er.usgs.gov/hurricanes/sandy/post-storm-photos/obliquephotos.html
My boat was ok but were I am for winter (manasquan river club) had...
daddy d, A little in the dark about what you are trying to do .You already have a 30amp breaker at your boat panel.To relocate shore power boat inlet you need to run new 10 Gauge, 4 Conductor (10/4) 600V SOOW wire from new location of boat inlet to boat panel.
Ron, sad stories this was a catastrophic event for so meany people.I hope things work out for you. We all learned lessons from this storm.
Found web page to check out areas of effects of storm in our area. http://storms.ngs.noaa.gov/storms/sandy/
scroll in to see area as of Nov,2012