Recent content by JMoberg

How often should the oil filters on Axius gen 1 be replaced? Thanks Skickat från min iPhone med Tapatalk

I wanted to keep the original looks and did not want to add an aft bow. Instead i extended the bimini bow and made an all new canvas behind the arch. Skickat från min iPhone med Tapatalk

My custom made camper. Now we can finally use the aft sofa.

Thank you Kasper, Interesting information about the DSM. I'll try to locate it and see if it is a Mexican version. About the trasducers i have only got one in the boat. it is a through hull model and it is located in bilge in front of the bilge pumps. It looks like a RM unit(P319). /Johan

Hi all, I get "no signal" from the depth sounder in my Raymarine C80. Some questions, - The boat is still on land and i suppose that mean i should get no value, but "no signal" tells me something wrong? The depth sounder did not give any value when the boat was in the water last year. - Where is...

Hi all, I'm a very proud owner of a 2009 Sea Ray 330 Sundancer(330 EU=310 US) with twin Mercruiser 377 and Axius. Can anyone tell how to see what generation av Axius is installed? Also, what is the latest software update?

He everyone, Tonight i was out in the boat to "flush "the fresh water tank. The tank was empty when i started and filled it up full. Then i used the freshwater pump to empty the tank again. Finally i should fill it up again, but ran into trouble. I could only fill the tank with a couple of...

Hi, Anyone recognises a 280 -04 named Miss Gorbie II or similar from Beaufort, NC?

It is a 5E. I found a PDF somewhere on the internet. Will see where it takes me... Thanks

Yes, this is how mine looks aswell. Seems to be ok then.

It is located in the back of the engine, just above the flywheel. There is a black tube with 4 hoses connected to it(power steering cooler) and the sensor is located on top of that tube. /Johan

Hi, I have a Sea Ray 280 DA -04 witha factory installed Kohler generator. It starts ok, andwhen i'm turning the breaker to "on" the voltage guage shows between 120-130v. The green power light does not light at all(nor the red one). If I try to start the stove it sounds strange and the red power...

Thanks for your answers. Regarding the engines, what i'm wondering is if the vortec-labeled 4,3 engines was a factory option or if there should have been Mercruiser 4,3 engines. Yes, I REALLY:-)live in Sweden, and therefore I will try to get a new speedo in my local shop. Today it seems to...

Hi all, New here. Got my 280 -2004 a couple of weeks ago and must say I really like it. The boat is fitted with 4,3 MPI Vortec engines, at least according to the valve covers... Is this standard or has the original engines been replaced? The speedometer is missing. Can anyone tell where to find...