Recent content by jimbo 84

I make my own vents using standard plastic paint pan inserts you can buy anywhere they sell paint. I have a 340 Sea Ray so I use 3, cut them in 1/2 so I have 6 pcs. I cut a 1/2 moon shape in the shrink wrap from top down and back up smaller than the 1/2 paint pan I am going to use. I then put 2"...

When I purchased my oil last year I knew nothing about this new oil. I'll have to look into this. If you find the info, please post it. Thanks for the tip.

In 2006 I picked up 5 gallons of oil from my dealer. They all came in a burgandy bottle, 3 were synthetic blend with blue in the label and 2 were synthetic with green in the label and stated for outboards. I called mercury and after getting to the right person was told to only use the 25-40...

In 2006 I picked up 5 gallons of oil from my dealer. They all came in a burgandy bottle, 3 were synthetic blend with blue in the label and 2 were synthetic with green in the label and stated for outboards. I called mercury and after getting to the right person was told to only use the 25-40...

If your 03 has the integrated swim platform there is a plastic through hull benind the wall in your trunk where your shore power hooks up. The wiring from your shore power goes through the floor to the bilge. Wash down the inside of your trunk, raise the engine hatch and see if you have water...

If you want to know when your boat was built, check under General Discussion around p24. Look for where was my boat made posted on 11/6/09. Scroll down to read what Shell-games and Chuck 1 wrote. They give you all the information you need.

Ken: This is a great idea. I'm a big do-it yourselfer and this looks like one of the easier projects to tackle. I'm going to pick up the parts and try it after I pump out next time. Thanks for the photos.

When you get ready to install your converter box, follow the instructions in the Forum My Glojunk actuslly works. It's aththe bottom of p.6 today. I think the instructions are on p.2 in the Forum. I did it yesterday and it works great. I get 34 or 36 channels crystal clear. But on my 05 340 I...

The antena gain should be attached to an access panel. Remove that panel and check the in-line fuse connected to the back of the gain control box.

Welcome, I'm new myself and I'm Just learning how to get around. Good Luck.

Try checking www.kendormarine.com. They buy Sea Ray overstock. I know people who have found parts for older Sea Rays, door locks, oven knobs hatshes and cabinet doors. Good Luck.

Mthor, Sent message today. If you didn't get it let me know

Thank You for your help. I have created a signature. Is there anything else I need to do to get started?

Can you tell me how to update my signature? I cant find out how to do it. Thanks

Thanks for the info, I'm still trying to figure out how to update my signature.