Recent content by HGM

Need to transport a 39 aft cabin from Long Island sound to the upper Chesapeake bay. Trying to decide weather to have it trucked if thats possible on run it down. Has anyone have any experience doing this?

I am looking for a original swim platform boarding ladder. If anybody has one for sale please send me a message. Thanks

Looks good! really like the swim platform. Where did you find the new platform?

I was asking because Mercruiser uses a ignition interrupt switch switch on there stern drives.

Is your 350 inboards?

Raw Water cooled?

I would do a few things to isolate the problem to the carburetor. First I would compare the #'s with the good carb. Mine didn't have tags on the carburetor but had #'s on the carb body. I would than switch Carburetors between engines. The carbs are easy to switch and it will insure that the...

What temperature are the engines running? Are they maintaining or fluctuating?

I have a 91 350 with 330 hp 454's. With a fresh tune I am cruising at 21k @ 3200 rpm.

Doesn't look like anything has been moved. I am thinking of just reversing the batteries. Maybe reversing them at the switches

I agree. Does anyone see a problem if I just switch them?

After checking, my 12 volt system has me confused. My batteries go down in just a few hours when on the hook. I replaced both house batteries and had the same problem. Figuring I had something pulling the system down, I stated checking amp drain with a DC amp clamp. What I found is that the...

After checking my 12 volt system has me confused. My batteries go down in just a few hours when on the hook. I replaced both house batteries and had the same problem. Figuring I had something pulling the system down, I stated checking amp drain with a DC amp clamp. What I found is that the...

After checking my 12 volt system has me confused. My batteries go down in just a few hours when on the hook. I replaced both house batteries and had the same problem. Figuring I had something pulling the system down, I stated checking amp drain with a DC amp clamp. What I found is that the...

I am going to replace the original upholstery glued to the hull of my 350 with foam backed vinyl starting this weekend. I was looking at 3M's #77 and their super high strength. Loctite also makes a spray. 3M also makes a water base brush on. Does anyone have a suggestion?