Recent content by Heavy310

Glad to see I'm not the only one prepping for another hard Mid-west winter. Great post. I've always done my own winterization and have never throught about pulling the thermostat housing to insure that anti-freeze made in thru. Thanks Scott. I pull the plugs and hoses that I can get to and then...

Good Luck Nehalennia we'll keeping our fingers and toes crossed for ya here in Meeechigan!! I'm always amazed at what you can learn on this forum. Thanks for the polisher and wax info Skip.

I like the sign alot. I agree with weave the only thing I would consider doing is putting Marysville on the same line as Washington, so that you only have the one line underneath. Maybe "Marysville, WA"

Well Gang I loosened up the arch which allowed me to pull the antenna cable back up thru the arch access panel. The cable had been pinched between the arch and the boat. I cut open the cable where it was pinched to see if there were any broken wires and could not fine any. I went back to...

Went down to the boat today and loosened the arch which allowed me to pull the antenna cable thru the Arch access. It was pinched but there is no broken wires. Called Garmin and told tech my story. He confered with another tech (senior tech supposedly) and they believe I have a bad antenna. I'm...

I recently (about two months ago) purchased a shiny new Garmin 4208 marine GPS. I installed it myself and everything worked fine up until about three weeks ago when one day it took about 15+ minutes to finally fine a statelite and start tracking. Since that day it has not tracked at all....All I...

Well Boys I just returned from the marina and the problem was ............ drum role please..........the SAFETY SWITCH. In my defense the thing is huge, about 1" in diameter and might I add looks nothing like what a normal "switch" should look like (my opinion). It looks to me like some type...

Quint4, I hope that isn't the problem because NO I haven't checked. I assumed it was hard wired in (I quess thats what I get for assuming). I will check it tomorrow and let you know. If that's the problem I wonder why they unplugged it after testing it, thanks for the reply. jrcinnh thanks...

I recently purchased a 1991 310 Sundancer and cannot get the electric stove to work. I know it's something I'm doing wrong. Yes the breaker in the breaker panel is ON. Is there another one somewhere? I went through the surveyor report and it stated that the "electric stove heated up and that the...