Recent content by hawkerjim

  1. hawkerjim

    boat is sea ray 340, engines 7.4l v drive

    boat is sea ray 340, engines 7.4l v drive
  2. hawkerjim

    340 SUNDANCER THREAD

  3. hawkerjim

    SR 340 Helm Windlass Control

    Control totally without power. Can't find 3 amp fuse. 100 amp appears OK. Spent three days looking for the culprit. Need Help... Hawkerjim
  4. hawkerjim

    Any Members in North Channel

    Hi LuckyTender: Heading for Kilarney tomorrow 8/13. 1999 340 Renee-Nichole.
  5. hawkerjim

    Steering Wheel adjustment

    Jim There is no adjustment. I installed a rotary system to get rid of the 5 inch travel of the rack. Rotary had 3 inch travel and wasmuch stiffer . Installed hydraulic this winter and it is marvelous. Zero free travel. Smooth... See my poost a few days ago. Hawkerjim
  6. hawkerjim

    Hydraulic Steering For 280

    I recently completed the installation of Teleflex, Sea Star, hydraulic steering in my 280. I removed the rotary system which had replaced the rack system. They had 5 inches and 3 inches of free travel respectively. Both were unacceptable for a variety of reasons. The hydraulic system has...
  7. hawkerjim

    Official 280 Sundancer Thread

    Turtletone Yes the drive doesn't turn until the wheel is turned 6", (3"with the rotary steering). This has been confirmed by the Mercuiser dealer. I own and work at a boat shop/marine and have never experienced this much slop before. The fixes on this site claim only a 50%reduction with...
  8. hawkerjim

    Official 280 Sundancer Thread

    TurtleTone Thanks Mike. Yes and yes are the answers to your questions. Jim
  9. hawkerjim

    Official 280 Sundancer Thread

    Re: Teleflex Steering Sea Ray 280,2004,496. We experienced 6" of free travel in the factory installed rack and pinion steering with tilt. Driving in a following sea, from the quarter, was a handfull. The decision was made to replace the factory system with the Teleflex rotary unit...
Back
Top