While changing my anchor rode I broke the brass bolt off of the windless motor for the up side... my question is is there a way to repair the bolt maybe solder or does the bolt unscrew from the motor.... it is a progress 1....
i have a 2000 340 and was wondering if anyone has installed a teak wood flooring in the head like on the 2018 350 dancer... if so what kind of wood did u use, how is it mounted, is it a diy project,
Well family I finaly unwrapped the boat from winter lay up and noticed the glomex antenna was cracked underneath.... My question is can I replace the dome with a new one and not replace all the wires and knob in the cabin....
Well I had to chime In on this.... on my first boat which was a 290 sundancer it came with 4 Sony 6.5s no amp no sub.... I Immediately got to work I'm not an audiophile by no means but I like a nice sound system... so I did some research and ended up buy a jl audio 6 channel amp 2 pair of wet...
Ok thanks for your feed back... I have a few more questions....1) can I just run one deep cycle battery for the house and 3 dual purpose for motor and genni... but if the starboard motor and house batteries are connected in parallel if I change those to to deep cycle will that be strong enough...
Thanks for the help I have decided to replace the batteries... looking online the boat is calling for group 31 800 cca 200 reserve the cheapest I found was 300 bucks each for agm.... so I may just do the 2 for the starboard side for now.... do u guys have any recommendations for cheaper...
Hey family i have a question about the battery set-up on the boat... the last few weeks of the boating season here in MI i had a problem starting the starboard motor had to use the emergency start to get it started... one issue is that the boat was plugged in to shore power so I'm assuming the...