Recent content by Equippro

Sherwood states replacement plate is part #18742 is that the wrong part #? Is #22767 the correct one?

No I didn't. Neither side had the impeller end cap. Changed both impellers when I bought the boat in 2021. Changed them again in 2023. I am glad you showed me this diagram as the previous owner had the boat serviced in Marblehead Oh at what was Salty Sams Marina which is now a MarineMax. I...

I Changed both last spring.

So this happened Sunday\. Fired up both engines to run for about 15mins since I haven't cranked them in a couple of months due to it being cold in Ga. After I shut down the starboard engine I noticed my bilge coming on every 5mins, which is not normal. So I then go into the engine room to find...

So this happened Sunday\. Fired up both engines to run for about 15mins since I haven't cranked them in a couple of months due to it being cold in Ga. After I shut down the starboard engine I noticed my bilge coming on every 5mins, which is not normal. So I then go into the engine room to find...

Does anyone have the part# for the water bib/pressure regulator inlet located in the stern locker next to the shore power terminal? My water pressure is great with the pump but terrible when hooked up to city water at the marina.

I just had Aqua Marine Deck installed in the cockpit and swim platform. I have the factory carpet panels that are in excellent shape if anyone needs them, just pay shipping cost ( they are heavy ) I'd hate to toss them in the dumpster. Layout is for 410 EC with sofa slide out.

I purchased from Sure Marine Service. Contact Troy. Yes he shipped to a freight terminal near my house and it saved in shipping cost. My cost was 2,548.80. Price has increased on it.

This is for the folks who asked me for inside pics.

I forgot to add that its AC/DC, as you can buy just a DC model only.

No Its the Cruise 195 in SS left hand opening

Yes ,, the price keeps going up and so does the shipping cost. I ordered back in the first of sept. It arrived around the first of December but with the holidays and weather I just got around to the install. Not sure why the pics keep coming in sideways?? The cabinet has to be shimmed and...

After waiting 3 months, I installed the new Isotherm fridge\freezer this past weekend. The cabinet did not have to be removed, just the first cabin door (which needed new trucks, rollers and tracks).

Hey Cocktail Time, I see you are also on lake Lanier. Yes you can rebuild the alternators and your starter motors. I use Sleepy Hollow rebuilders on Hwy 20 between Canton and Cumming. Great work and honest business to deal with. I highly recommend if you ever have the need. They rebuild for my...

Mitch,, thanks for the quick reply. I will check them out.