Recent content by Ed Harris

  1. E

    Screen on cuddy hatch 1996 215 EC

    So it doesn’t fit into any grooves or channels?
  2. E

    Screen on cuddy hatch 1996 215 EC

    What is the process of reinstalling the screen that covers the cuddy hatch window? Mine has a rigid aluminum frame around the screen will not bend at all.
  3. E

    AC Delco Oil filter

    My oil pressure tends to run a little higher when using an AC Delco.
  4. E

    Temperature Gauge

    Ran the a few days later and was still getting 195 on the gauge while under a load. So with that I ordered a new oil pressure gauge and temp gauge since the originals were 23 years old and looking shabby. Now while running on the hose the temp only gets to 150 with the new gauge at 1000 rpms...
  5. E

    Temperature Gauge

    Checked tstat today and found that I did not have an Oring under the stat so I put one in and cleaned all connections that make the ground. Ran on the hose for about 20 mins and only got to 175 with a 160 stat in it.
  6. E

    Cabin Lights on 1996 215 Express Cruiser

    My interior cabin lights operate on a manual slide switch. When I remove the bulb and check the voltage with the switch on I get 12 volts. When I turn the switch off and replace the bulb then slide the switch on the light will not come on. You would think the bulb is bad. But when I crank...
  7. E

    Temperature Gauge

    Does the sender have the type sender # stamped into it so you can match the gauge with it?
  8. E

    Temperature Gauge

    Was looking at replacing my water temp gauge and oil pressure gauge on my 215 SR Express Cruiser 1996 model. 5.7L with 2 brrl carb. Alpha 2 outdrive. Will an off the shelf gauge from west Marine work?
Back
Top