Recent content by E.Rice

Pulled exhaust elbow and filter side of turbo its locked up completely, shipped off today to Turbo Dave in FL. Complete rebuild $1,500. I didn't have salt water intrusion, maybe sitting up over the years got to it -will know more once Dave dives into it.

Freshwater flush tee

Reviving an old post - Where did you have your turbos rebuilt ?

They sound very thorough, here just getting someone competent down to the boat is a chore. I would buy you a case of beer if that is my problem I will get down there and thoroughly go over the hoses and clamps. Maybe sweet talk my buddy to put some boost gauges on the engines also like to see...

Need input tired of hiring mechanics wife and kid out of town next week determined to figure out the old issue that has resurfaced, stbd will not go over 1600-1700 rpm’s and at wot rolling coal. I know the fuel side is good now, now to dive into the air side. I pulled and cleaned aftercooler...

Wanted to update, after weeks and having to rebuild the Denso injection pump, replacing mechanical lift pump and starter solenoid. The main issue which the mechanic and I found is that the stbd fuel supply line feeding the fuel selector valves is allowing air into the line. Move both engines...

Anyone replace the anti-siphon valves on the tanks - would you have a partno? Ordered new mechanical lift pump and going to replace this valve also ruling out everything, I do not have enough fuel pressure for the Denso injection pump that needs 20-25 psi. Also got the Racor gauges to see if I...

We have fuel pressure to the last secondary filter and the Denso injection pump opened the line and cranked to check but fuel is not getting through that pump to the nozzles - nothing when we cracked open to bleed the air no fuel. Calling around now to find a diesel company to come check out the...

Fuel solenoid is operating correctly even removed and held open fuel is getting to the injection pump and after trying to bleed injectors and took all filters off and had to fill up. For some reason the system had air seemed like it had a vacuum pulled open racors and air was sucked in (problem...

I have the Cummins with ford style starting solenoid - hopefully fuel selonoid is the issue

Yes lack of fuel is my thought - thanks good idea will allow me to be down there, think the fuel solenoid is not getting power to open or its toast. Had the same issue on the Genny and replaced fuel solenoid

History of this ongoing issue, several times at dock and at anchor STBD will crank 4-5 seconds than start or not start at all. I could after several times cranking usually get it started. Eventfully it got worst and wouldn't start than I found I could toggle the master ignition switch and until...

Correct I have the aluminum bar also and 3 boards that support the bed. We use it often.

Removed the back seats to get more access unscrewed it and it barely comes out. Screwed the new one as tight as I could get it filled gaps with silicone and took off the wood panels behind it for easier access and more air. Not fun at all in the heat , Added another one behind chair also both on...