dtfeld's Recent Activity
-
dtfeld liked ttmott's post in the thread Steps to start diesel generator.
I'll depart to another direction - Three bank battery charger, Three charging alternators, Three battery disconnects... Keep three...
May 31, 2023 at 4:01 PM -
dtfeld liked km1125's post in the thread Freezer won't cool..
That is definitely the low side fitting for checking the pressure, evacuating and refilling. You should check, but I'll bet that unit...
May 31, 2023 at 4:00 PM -
dtfeld liked SKybolt's post in the thread Freezer won't cool..
That may be a valve, but it's not for gauges. It's for adding compressor oil and initial charge from factory. The gauge ports would be...
May 30, 2023 at 10:10 PM -
dtfeld liked b_arrington's post in the thread Freezer won't cool..
It’s paint.
May 30, 2023 at 8:32 PM -
dtfeld liked KevinC's post in the thread Advice on modifying canvas around snaps.
On a new install the snaps will be installed right through the canvas and backing - which in this case is typically webbing. The webbing...
May 30, 2023 at 6:38 PM -
dtfeld liked boatrboy's post in the thread Advice on modifying canvas around snaps.
I think I follow. Typically how big of a patch do you cut? By closing the binding do you mean stitch it back together? Thanks - Mark
May 30, 2023 at 6:38 PM -
dtfeld attached a file to the thread Freezer won't cool..
Is that ice or paint on the capillary tube? Sure looks like ice... [ATTACH]
May 30, 2023 at 6:20 PM
-
dtfeld liked b_arrington's post in the thread Freezer won't cool..
It looks like I have a valve on mine. Handy, but I don’t have a set gauges. [ATTACH]
May 30, 2023 at 6:18 PM
-
dtfeld liked bbwhitejr's post in the thread Freezer won't cool..
I had a NorCold refrigerator/freezer a few years ago doing same. There are no ports to hook up refrigeration gauges. However, they...
May 30, 2023 at 6:14 PM -
dtfeld replied to the thread 410 Sundancer/Express Cruiser and 400 Sundancer/Express Cruiser **Official Thread**.
Amen...
May 30, 2023 at 6:12 PM -
dtfeld liked Stee6043's post in the thread 410 Sundancer/Express Cruiser and 400 Sundancer/Express Cruiser **Official Thread**.
I went with the 9000 - single compressor. I was about to pull the trigger on the dual compressor when I thought the single went out of...
May 30, 2023 at 6:12 PM -
dtfeld liked SKybolt's post in the thread Steps to start diesel generator.
That's no lie! I just replaced the two of them and used a make shift rope winch to get them in/out of the engine room.
May 30, 2023 at 6:05 PM -
dtfeld replied to the thread Steps to start diesel generator.
Have Hernia Insurance?! The G31's are bad enough!!
May 30, 2023 at 5:45 PM -
dtfeld liked SKybolt's post in the thread Steps to start diesel generator.
For what ever it may be worth. I connected my generator to my port engine battery. I also removed the field wire from the alternator of...
May 30, 2023 at 5:44 PM -
dtfeld replied to the thread Steps to start diesel generator.
On sale $149 a couple years ago.
May 30, 2023 at 5:24 PM