Recent content by daddyissues

Has anyone replaced the underwater exhaust port? Noticed mine was missing last pull out so I need to replace it. I purchased the port and it shows four holes for screws. Does it just screw into the hull? Should I use 5200 sealant? Could it be done during a pull and power wash or should it sit...

Speaking of gauges, I have an alba-combi to connect the gauges to my chartplotter. Does anyone know which pins give the signal to be read? The gauges have multiple spots to attach to. I was able to figure out RPMs and (I think) fuel but struggling with the others.

One of my guests broke the freezer handle last weekend. Anyone replace their refrigerator and still have the old one? Would love to buy the freezer door from you.

I'm changing my engine impellers for the first time and I can't get it out. Is something holding it in as it won't budge.

I'm looking to monitor the voltage and current of the port and starboard batteries. Where would be the best place to connect a cable to monitor the current?

The OEM faucet sucked too. So I don't think it's the aerators.

I just replaced the galley faucet. One problem we've had for a while is that the pressure seems low. The master head faucet has a ton of pressure. Any idea why the galley pressure would be lower? I want to put a filter on the cold water line but it will reduce the pressure even more.

We replaced our bridge and cockpit speakers with JBL and are very satisfied with them. We also replaced the subwoofer and added two more amps along with a Fusion stereo. Sounds awesome.

The faucet in my guest head is leaking pretty badly with the knobs shut off. (May have frozen.) Has anyone replaced or repaired it? Looks like the lines are pretty tight and difficult to access.

My battery charger just died. Only the starboard engine batteries drained. Now I'm confused as to what batteries do what. Generator battery is understandable, then two batteries for the port engine and two for the starboard engine. So it appears my house power is drawing off of the starboard...

The one on the engine block. Racor was changed this summer with no issues.

I did put it on without adding fuel, and cranked it. Then I remembered to add fuel. Is there a way to prime the engine? When I take the line off that goes to the filter, I'm not seeing any fuel flow. Is that line the supply or return?

I changed the fuel filter attached to the Westerbreke diesel generator and now it won't start. Plunger is moving but not seeing any fuel come out of the fuel line to the filter. Any idea why? It was running before I changed the filter.

I have a 2000 Sedan Bridge w/3116's. Where do you fill the transmission fluid?

The salon A/C is flashing LO PS. I don't see this in the manual, what does it mean?