With the price and availibilty of omc parts compared to mercruiser i was hoping to save some money for any future repairs.
From what i have been able to find on the internet, the conversion kit would run about 300 or so. There is a reducer plate for the hole in the transom and some various...
I am thinking about picking up a second boat for a song that has a bad omc outdrive. The boat is a 17' vip with ford 1.3l engine in it.
For parts availibilty i have heard there is a conversion kit that you can use, that will give you the ability to use a mercruiser outdrive.
Has anybody done...
Have a question for the more knowledgeable guys here. What are some of the good and bad point between a mercruiser and cobra drive?
I know a guy that says to stay from cobra because they are to expensive to fix. Do they break that often or the parts that hard to find?
LOL. That is so funny shamutoo, I just picked up a 72 240srv that has the retro look going. The first time I saw the cuddy, two things came to mind.
The shag carpet on the ceiling would be great with a couple of small spots at the rear of the cabin shining forward onto the disco ball. And the...
Hey guys, I am new to the boating scene and have a related question for the more knowledgeable people here. Have a 72 240 srv with a 350. Wot is around 4300 rpm amd getting about 27 mph out of it.
I have seen hydrofoils that claim to keep the boat on plane at a lower rpm and saves gas also among...
Hoosier, what pitch prop do you use to pull with? I have 19 on mine and thinking about going to a 17 for some more umph out of the hole and getting a 21 pitch for cruising.
Thanks chuck and everybody. Brand new to this stuff and all. Still trying to fugure it all out. Live in toledo, so going to use it in the maumee river and around cleveland, sandusky and detroit area this summer.
Getting a new gps/chartplotter, and I am wondering who has the best customer support and service with reliablility.
Garmin, lowrance or raymarine?
:smt024
I have a 19 pitch prop on a 351 windsor. With 2 adults and 2 kids I was getting 4400 rpm and eventually a top speed of about 30 kts at full throttle. Out on the road for work right now so i didn't get a chance to measure the trim tabs but they looked like they were 8-10" wide and maybe 6" deep ...
I have 1972 240srv that is 24' long. has the 351 engine with mercruiser i/o. Currently have a 19 pitch prop. MY friend and i want to do some tubing and maybe kneeboarding and trying to find some alternatives to get it up on plane faster. Was thinking about a hydrofoil on the outdrive. What other...
Nice avatar dave:) Except I think i could only get a twin 50cal on the bow. This boat comes in at whopping 4400 lbs empty. Trying to figure out a way to get it on plane faster and keep the bow down without increasing the drag too much.