Recent content by bpro

http://i229.photobucket.com/albums/ee114/brandon95yj/arch_zps24908dd2.jpg

Question in regards to my VHF Antenna I need change out my antenna on my 29 Amberjack. The antenna is mounted to the arch. I am not near my boat right now but do recall observing that the antenna cable is only 6-8 inches long and screws into the top of the arch. My question is if anyone has...

I replaced my manifolds and elbows (closed cooling system) on my Amberjack last winter. They were in bad shape. The boat was a Florida boat from 2006 to 2010. I got my replacements from Michigan Motorz. It was about $2k in parts to do both engines with all mercruiser parts

b_arrington. The ride quality of the 290 AJ is pretty good. The boat acts more like a 32 or 33' boat. Good luck finding an 290 AJ without the bait station. Keep in mind that if you find one without the bait station it will likely not have the alum. arch and rod holders. I personally love my...

I am looking to find replacement deck seals for all of the hatches in the cockpit. Sea Ray parts catalog call it "MOLDING, FOAM RBR "D-SHAPE" 1.75" W/HAT ADH". Does anyone know where I can buy this stuff in bulk?thanks

Pulled the Starboard side this weekend. Man what a PITA. There is no hardware that holds the piece in place. Sea Ray just put 4200 on the inside, stuck it in place and caulked around the perimeter. It was just too hot outside to fool with the Port side. Oh well, that is what next weekend is...

I would recommend scrapping and cleaning all the underwater running gear. When was the last time you ran the boat? The algae and barnacles this year have been really bad in the chesapeake. My boat sat for 3 weeks without being run and it wouldn't get up on plane until I cleaned it off.

The plastic vents that attached to the side deck on my 290 AJ need to be replaced. In order to replace the small 4" vents, the side vents need to be removed. Has anyone removed these side vents on their AJ before. Are they bolted/screwed in from the back side or do they snap in place...