1974 sea ray
Good evening.
This could be one of several things and some of them could be moisture, loose ignition or coil wire ect. First pop the cap and see if there is any sign of moisture and or a spark between the points gap. If no spark is presant, most often boats with points just need...
You deffinitly want to remove the coutions because it is a very wet job. I did this on my concrete drive way. Also, you want to rince out the solution several times. then you must squeeze the majority of the water out, then let it air dry several days keeping it out of the rain.
This worked for me!
Well if anyone else has this problem this is what worked for me. I took a solution of mostly water and a little bleach/upolstry cleaner in a bucket and doused the mattress down with several buckets full of the solution. Then I flushed the mattress with tap water for...
I see two possabilities. First check the amp draw if possible. Take a clamp on ameter and clamp it around the hot lead (set meter on DC amps), then turn the wipers on and see the amperage that the unit is drawing. if the amp draw is higher than the curcuit then here is what you do. 1) check for...
Good evening everyone,
I have a 1985 390 sport fish that I'm restoring and I am having a difficult time finding the gaskets or seals that go around the 8' side windows that cover the screw heads. I tried Sea Ray and Talor Made with dim results. All say that thier records are nonexistant or...
My 1985 390 Sportfish has a bit of what appears to be mold (black spots) on the foam mattres not to mentoin a funkey smell. Is there a cleaning process I could go through, or is it time to purchace a new one?
Hello, my name is Bobby D. and been boating/diving/fishing the southern portion of Lake Michigan for about 20 years. Just bought my first
Sea Ray, she is a 1985 390 Sport Fish. Been workin on her (cosmeticly) for four weeks and with mother natures blessing, will splash in two weeks or so. If...