Simply call 1-877-594-5623 I don't have the fuel hose on web site yet. I will need to know the I.D. of the vent line. I will be putting all sorts of hose from 3/8" to 6" wet exhaust, fuel, etc up over the winter. Prices will be very competitive.
Please allow me to clarify for all...
All these guys are right. What you need to learn is that there is actually a fungus that grows IN diesel. Not properly protected it will grow in the tank and filters and look like seaweed. There are many products on the market and some do one thing and others do another thing. What is important...
Well I'm not going to tell you your dealer is wrong. What they do is put out literature that the largest idiot on earth can follow and not come back and sue them. ALL the steps and hoops they say to jump through are not entirely necessary if a person has any mechanical ability or is being...
Boy wish I knew what pumps exactly you guys had. I would put those impellers and cam kits on my web site. You're getting killed at 200.00 a pop.
Brad
www.marinediscounters.com
Thank you, for that matter, if there are products you guys use often or have a hard time finding, please let me know. I will put them on the site at a serious savings to you. That is, after all why I started marinediscounters.com, to help out boaters like myself.
Brad
I have been using it on diesel for about 8 years and on gas for about 4. I winterize in the nieborhood of 400 boats a fall. We use the Star Tron on our customers at every fill up to reduce the likelyhood that the ethanol will break down into water. I will have it on my web site soon in quarts...
The best way to do this inexpensivly is to use the "Yacht Brite" system. These chemicals and polishes are state of the art. They do a wonderful job at rubbing out, cleaning and polishing on a co-polymer basis. No heavy waxes to build up and turn yellow over time. I reccomend everyone try...
Yes the vent is the same as the over flow. As for the ducting, you can buy a couling that has a duct attachment molded into it. If you have a hard time finding one I am a Marine Air dealer and could help you by speaking with you. You can also build your own. I have done this by basicly...
If the engine is closed cooled DO NOT pull plugs as the anti freeze will run out. All that is needed is to drain the heat exchanger and sea strainer(if equiped). Turn off sea cock, start engine and por 2 gallons of the -100 into starianer and fog engine as the last gallon goes in. Simple as...