bfernald0's latest activity

  • bfernald0
    Govee products work great. In addition to smart plugs, they have remote temp sensors. I can monitor fridge and icemaker temps, and...
  • bfernald0
    Always like to recommend vendors that impress. My 8.2 Mercs were due for water pump changes (4 yrs in saltwater). No leaks yet, but I...
  • bfernald0
    bfernald0 reacted to keokie's post in the thread 99 310 Sundancer Repower? with Like Like.
    I have done a number of engine swaps in boats over the years. I always did my research to make sure I knew what I was getting into...
  • bfernald0
    bfernald0 replied to the thread 99 310 Sundancer Repower?.
    I would stick with the what you've got or its going to get expensive. I acquired a basically unused 2001 340 Sundancer with 7.4 MPIs...
  • bfernald0
    bfernald0 replied to the thread High seawater pressure.
    Well, that's evidence against a blockage. Although I agree with the folks on here that high water pressure is generally the result of...
  • bfernald0
    bfernald0 replied to the thread High seawater pressure.
    Do you have a scanner. I'd be curious what your exhaust Temps are
  • bfernald0
    bfernald0 replied to the thread 2000 380 DA.
    Let me know when you come to sell ;-) Zincs every few months, more so during the summer months. Fully flush with saltaway after every...
  • bfernald0
    bfernald0 replied to the thread 2000 380 DA.
    Going to buty my next boat up there and ship it out.
  • bfernald0
    Does anyone watch their videos. Rebuilding 70 year old Chrysler marine engines along with more recent stuff Few machine shops left that...
  • bfernald0
    bfernald0 replied to the thread 2000 380 DA.
    You boys live in a different universe up there. I'm painting, flushing with saltaway, spraying everything with yamalube in a desperate...
  • bfernald0
    bfernald0 replied to the thread 2000 380 DA.
    Omg. 20+ year old manifolds/risers?! That's your answer. Lol
  • bfernald0
    bfernald0 replied to the thread 2000 380 DA.
    If you've got one cylinder at 75, in all likelihood you've got a valve that's partially stuck open or something else rather dramatic...
  • bfernald0
    Actually, all water heaters have anodes, even the 50 gallon tank ones in your garage. No one ever replaces them. Heat and water...
  • bfernald0
    I replaced my original with an 11 gallon whale/atwood water hearter. Here's the anode. 3/4 NPT with one big hunk of magnesium. All...
  • bfernald0
    You have to remove the water faucet fitting, and replace with a MAGNESIUM anode. The anodes are big. Just swapped mine after 3 years...
Back
Top