Recent content by aross2566

Lol….it’s not the money. It’s the convenience. Bought our 370 8 years ago. After pricing a new ice maker. Said once it goes out, we’re not replacing it. Well, it went out. Guess what? Bought a new one. Couldn’t imagine not having it.

My bad. There’s an outlet just below the light switch. It’s GFI protected. It was tripped. Reset. Problem solved.

1991 350/370 SD No power to switch for the light over sink. Plus no power to the coffee maker. They appear to be on the same line. Where is the fuse panel located, if there is one. Every other 110 works.

Well. Wasn’t the t fittings. But it was in that area under the steps. Both ac’s drain into shower sump. It pumps out from there on the port side. There’s a check valve in line to stop back flow. That check valve was cracked in half. The rear of the frig is right there. So it filled up that...

Thank you!!! This is exactly what I’m thinking. Was hoping to get it confirmed.

Thanks for your input. There is some water in the in floor storage. But I believe that’s from the leak in my line going forward. My midship pump is kicking on. And the floor in front of the fridge is getting wet. That’s about 12” higher than the bottom of the storage area. It gets wet when I...

I’m getting ready to try and fix the leak. But one question. Where in that line going back does the line split off to supply the rear ac unit?

That sucks. Where was your leak? Mine is right in front of the fridge. Seems like an odd place.

Thanks guys. Pan is not plugged. Dry as a bone. The water supply line (garden hose) running from the sea water pump to the ac runs thru the in floor storage in the middle of the cabin. That floor is also wet. I turned off that pump and the floor is drying. So I’m pretty sure that’s the issue...

1991 Sea Ray 350/370. This one has me stumped. First time at boat this year. Got the motors going. Turn the ac units on. After a couple hours, notice the carpet in front of the frig was wet. The longer it went the wetter it got. Put fan on and went to bed. Woke up today. Carpet was dry. Couple...

You are correct. Genny is not working. And mechanic was looking for the “inverter”. Thanks for clarification.

I have a 1991 350/370 Dancer. I’m trying to locate the inverter. There’s a toggle for one on the panel. But I can’t find it anywhere. Any suggestions?

Problem solved. One of the risers was bad. Leaking antifreeze into the exhaust which in turn was being sucked into a couple cylinders. As I said before. I chased this problem for two years. Glad it’s over.

Thanks Beech. Yes I have done all you suggested. No water in oil. You confirmed what my mechanic stated. And I’m with you on OEM parts. I’ll have them replaced and report back. Thanks again.