Recent content by alkisearay

Has anyone changed out the bulbs in their reading lights (whatever the directional lights are called in the cabin) with LED's? If so what type/watts did you use?

Hey my fuel gauges both have the needle jumping around; when I tap them they stop. They also stop doing it when the fuel goes down to a lower level. Any ideas? DO I have to replace them? I already checked the wires at the back and they look tight

The House battery is the one between the motors in the bilge on the starborad engine bank

huh?

I have a Hypalon Achillies that has some black marks on it from sitting in the water, any recco's for a claner?:huh:

On my 330 I noticed a gas smell and found out the fuel lines from the remote fuel filter to the fuel pump and to the carburator on one engine had corroded thru. Not the best metal for their construciton is used. Worth a check

CD Changer My Clarion OEM CD changer is stuck, anyone have any known issues I can look for?

Try www.partsfortechs.com I bought a exactly those parts from them about 2 years ago. Let em knwo if you are able to get the pipe thread out I had to finally do a work around

I tried to sell my 330 (although is is older at a 1994) last year and didn't get any bites at all, and I priced it a couple thousand below book and below anyone else on CL. Decided to keep it one year and see how my family enjoys it. I must say very good points on the economy and I fully...

OK well it is cool that it went sideways but now that I have read your posts I guess I should probably explain my electrical needs. I have a microwave, TV, and an icemaker for the most part everything else is DC. I use my boat mostly for day runs and occaisional weekends. I do not have AC and up...

Well I fixed an oil leak in my Quicksilver 5.0, yet another repair to the one thing in my boat that seems to malfunction more than anything else (and is hardest to get at). Thinking next time maybe rip it out and installing a generator; all it really does is run the microwave and the ice maker...

I use ZIp ties on my all chain rode, marked every 15 feet (1=15, 2=39). Lasts longer then paint and is easier to apply

1. Is you slip a single-boat slip or do you share the slip with one or more boats? Two Boats with pilings; covered slip (always) 2. Do you put your boat bow-in or stern-in? Stern in to protect teh canvas 3. Re the question above, why? 4. Is your slip perpendicular to the main dock or is...

All I have is a bunch of freaky live aboards in trawlers (actually some are cool). But this is Seattle. And I'm moving back to Lake Union after my lease expires in March

Ian what are the dinmensions on your new table? I was thinking of the same thing