gerryb, I have the same problem with the MPS-35 power supply; it works on AC but not on DC. Would love to learn how to fix it, rather than buying a new one each time it goes (not first failure).
I have a bad MPS 35 that puts out 27v on AC but only 12v on battery. Can this be fixed or should I get a new one? Will the MPS 50 work for this refrigerator?
Hi Dave,
I just purchased a 2006 Sundancer with the 5.7 Merc with Smartcraft (display in the tach)
It also has the Navman 5505. Can you tell me what the Gateway part number is?
Any additional help would be apreciated.
thanks,
AB
See ebay under props for 22x23 4 blade nibral props
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=290343717408&ssPageName=STRK:MESELX:IT
Can anyone tell me about RPM/speed?
I purchased mine used in 2004 and during the sea trial, top speed was 32kn @ 5,000rpm. I have the 8.1s, ZF2.5, 21x23 4 blade nibrals. I also tried 22x23 but still go up to 4,950rpm. Anyone else see this? Anyone out there have props that are 25 or 27 pitch? I'd...
I get about 23-23.5kn at 3600rpm. Sounds really nice at that speed. I can however reach 32kn @ 5000rpm, but don't dare run like that a lot. I have 8.1s, 2.5ZF, 21x23 4 blade NIBRALs. The spares are 22x23 but not much difference. I would like to try 22x25, and see if I can lower my WOT. If...
I have a 2002 360 and I have the same problem. I thought of using clear silicone to build a dam behind the drain, thus forcing the water to stop at the silicone and drain through the channel in the fiberglass.