2005, 340 Sundancer Sink Replacement

Bill Sampson

New Member
Jun 10, 2018
10
Boat Info
2005 340 Sundancer
E80 GPS
Twin 496 cid
Engines
496. CID
New Member:
I recently purchase a 2005 Sundancer 340 (My third Sea Ray as Owner)
The wet Bar sink is cracked and I would like to replace.
The part number is: 1689318 SINK, V/F WET BAR ARW 340DA-03

Any suggestions?
 
I am in process of renovating both the cockpit and the head counters and sinks. If interested I will be posting more info. Otherwise I may have a cockpit sink available when mine comes out if it is in one piece. My head sink is crack which is the reason for the work.

-Kevin
 
I am in process of renovating both the cockpit and the head counters and sinks. If interested I will be posting more info. Otherwise I may have a cockpit sink available when mine comes out if it is in one piece. My head sink is crack which is the reason for the work.

-Kevin
Thanks Kevin, I would be interested in it.
 
I wonder if they are similarly sized sinks...

It's a non-standard size sink. For just the cockpit replacement @Bill Sampson could probably pickup a larger round sink and cut out. My problem is it's the same size sink in the head and to cover the X length the sinks are too wide on the Y. Sinks that fit on the Y leave a gap on the X. Therefore I have to (well really prefer to) put in a counter and mount the sink.

-Kevin.
 

Attachments

  • IMG_4428.JPG
    IMG_4428.JPG
    74.9 KB · Views: 528
  • IMG_4429.JPG
    IMG_4429.JPG
    88.6 KB · Views: 400
Here is an option
 

Attachments

  • IMG_0678.JPG
    IMG_0678.JPG
    62.3 KB · Views: 345
Here is an option

That's not going to work for that location - you are limited on your sink depth because of the fridge below it. The drain will also need to be offset to one side to clear the fridge. You are also going to need to be aware of drain sizes, baskets and fittings to match the drain pipe.

It is also recommended by many of the marine manufactures to stay away from high polished stainless and go with the brushed. I am not sure if it is because of the finish not staying bright or if it is because of the potential of the sun reflecting and causing problems.

I chose a brushed finish for my sink and new faucet in the cockpit and a high polished for my head sink. I am also replacing the stock faucet in the head with a modern two part faucet (not a pullout in the conventional sense) shower head unit.

-Kevin
 
Thanks,
Out of curiosity what did they charge?
 
I’m interested in the cost for this sink as well, thanks!
 
Here in Canada the sea ray dealer wants $419.00
The sinks are pretty cheaply made and are thin. Presently I gave mine to a guy who is going to glass it. Waiting to see what it looks like
 
We're still going the stainless sink route, however, I am not able to proceed because of all the up coming weekends we have planned use.

Too short of a season to loose our sinks for renovations. Plans are now to start after labor day when kids are back to school.

-Kevin
 
I think replacing the white cockpit sink and faucet with stainless sink and chrome faucet was the first thing I did when I brought the boat home last year.
Doing that and adding the cockpit floor covering changed the look of the boat a lot.
I had to do a very little bit of trimming with a dremel to get the new sink to fit perfectly, and while the sink and faucet were easy finds the drain took a bit of searching but it was worth it.
 
New Member:
I recently purchase a 2005 Sundancer 340 (My third Sea Ray as Owner)
The wet Bar sink is cracked and I would like to replace.
The part number is: 1689318 SINK, V/F WET BAR ARW 340DA-03

Any suggestions?
My sink was cracked too. I replaced it with a Coriander counter that I count my self and put a new sink and tap in.
FA044ED2-B3C1-4AF1-80FE-63875C8AF4BB.jpeg
BA662B7D-819F-4DFF-81AD-DB5306A1C2A7.jpeg
 

Forum statistics

Threads
112,950
Messages
1,422,833
Members
60,931
Latest member
Ebrown69
Back
Top