340 Cockpit Table

DaleM

Member
Aug 5, 2009
690
Mt Airy, MD
Boat Info
340 Sundancer
Engines
Twin 8.1 Horizons
Does anyone know off the top of their heads the dimensions of the standard cockpit table that comes with the boat? I forgot to measure it this weekend. I'm in the process of making a new teak table to replace it with but still want the ability to store it in the bracket under the engine cover.

Thanks!

Dale
 
Cockpit table on my 2004 340SDA is 35" x 19". Just measured it because we were thinking of having a Corian table cut. Looking at the mount you could probably go to 36" or even close to 38" if you are willing to move the bracket from the inside of the support to the outside. Keep in mind if you plan on using it to support the filler cushion it would more than likely need to be the same shape.

-Kevin
 
Thanks Kevin. I totally forgot that it acted as a filler. We rarely make up the lounge but I’d still like to keep that as an option. We might move the cockpit table to downstairs, or just stow it in the rack until we need it.
 
Thanks Kevin. I totally forgot that it acted as a filler. We rarely make up the lounge but I’d still like to keep that as an option. We might move the cockpit table to downstairs, or just stow it in the rack until we need it.

Let me know what you wind up doing about the table - I am not 100% sold on the Corian but it is part of my cockpit upgrade plan. I am replacing the sink and faucet along with a new counter and was thinking about having them match. My table is a little warped and makes it difficult to keep plates and drinks on without wobbling. I was planning on keeping the old table for the filler just in case but store it off the boat.

-Kevin
 
2011-05-25_17-18-38_838.jpg
 
That is friggin' sweet. I hate my table.
Hey Mike, I felt the same way... You have $100k to $999k boat and they put a 2-bit plastic/fiberglass POS table on it. It is an insult. There I feel much better now...lol
 
Any pictures and ballpark costs ?

-Kevin
I will look to see if I have any photos here. If not I will have to get next time at boat. I was lucky to have am Amish wood worker around here and he charged about 300.00. Very good workmanship. He used my old table as a template to make the new one. JP
 

Forum statistics

Threads
112,943
Messages
1,422,707
Members
60,927
Latest member
Jaguar65
Back
Top