Need Electronic Switch Pad for year 2000 190 Signature Bowrider

beernutz

beernutz

Member
Aug 16, 2009
427
Mobile, AL
Boat Info
2000 190 Signature BR
Engines
5.0L EFI 240 hp Mercruiser
My electronic switch pad on my 2000 190 signature bowrider apparently is fried according to the mechanic looking at it and so far he has been unable to find a replacement. The parts I need appear to be 1123785 and 1142314 according to the parts diagram below. Does anyone know a good source for these parts?
Thanks in advance!
ljn1.jpg
 
Nevermind. I searched all over the internet including FP's website and came up with nada so I called Sea Ray and was told the 1142314 part is no longer made and none are in inventory but they had a replacement for a mere $245 shipped. Since the boat is a huge doorstop without this part I forked it over.
 
Last edited:
Did you get both parts for $245? I replaced the keypad aka "Peanut" in my 2000 Sundancer only to find out that the Elecontronic Interface Module was the real culprit. I think the only thing that had been wrong with the keypad was that the back lighting was shot. At least with both parts new they should last awhile. Replacing the keypad was easy but ran into a problem replacing the EIM. Several of the male pins on the old EIM were corroded so when i tried to take out the wiring harness plug they broke off in the plug. Luckily i was able to drill out the pins so i didn't have to replace the harness as well.
 
Scoyager said:
Did you get both parts for $245? I replaced the keypad aka "Peanut" in my 2000 Sundancer only to find out that the Elecontronic Interface Module was the real culprit. I think the only thing that had been wrong with the keypad was that the back lighting was shot. At least with both parts new they should last awhile. Replacing the keypad was easy but ran into a problem replacing the EIM. Several of the male pins on the old EIM were corroded so when i tried to take out the wiring harness plug they broke off in the plug. Luckily i was able to drill out the pins so i didn't have to replace the harness as well.
Click to expand...
No, the part 1142314 was $245 shipped by itself without the EIM. I think I was first quoted $279 + shipping but the lady I spoke to ultimately offered it to me for the $245 so I snatched up that "bargain".
 
I paid around $260 for the switch pad and more then that for the EIM. I ordered from a Sea Ray dealer and I'm sure they marked up both parts substantially. Hopefully all you need is the pad. Good luck and let us know how you make out.
 
I took the boat to my closest MarineMax which is just over an hour away and they diagnosed the EIM as also being bad in addition to the fried switch pad. An EIM was ordered last week ($305) but hasn't arrived yet. Fingers are crossed that the new parts will fix things.
 
Hi, I'm in Copenhagen, Denmark with same Issue :-( Am I correct in understanding that both the switchpanel and the EIM was order from Sea Ray (but thru a dealer, Marine Max? Can I ask for the parnumbers used foe ordering? I have a 260 Sundancer from 2002.

Thanks. Br. Asbjorn
 
You must log in or register to reply here.

Forum statistics

Threads
113,163
Messages
1,427,623
Members
61,073
Latest member
kolak3
Back
Top