Looking for 22", TV/DVD combo for 12v.

MonacoMike

MonacoMike

Well-Known Member
Sep 15, 2009
14,721
Indiana lakes and Lake Michigan
Boat Info
2000 Cruisers 3870
8.2 Mercs
Engines
85 Sea Ray Monaco 197
260hp Alpha 1
I would like to find a TV/DVD combo in a preferred 22” class or a 19” class size. I want one that I can cut off the power pack and plug into the 12v lighter connection. Anyone have a suggestion for a model like that.
Thanks, MM
 
Mike do a search. Many including myself have cut the power bricks off of Insignia TVs. I have the 19". Already had a 12VDC DVD player, believe its an Emerson brand.
 
Toshiba has a nice 22" DVD/Combo I saw at Costco.
 
Thanks, for the suggestions. Are the truckstop brands good quality compared to name brands?

Todd did you see if it had a power pack? I love Costco.

MM
 
Mike,
I had the 22" Toshiba TV/DVD combo installed on my previous boat with an AC connection. If you have an inverter you might consider this option since there are more named brand AC TVs to choose from than DC ones.
 
Last edited:
MonacoMike said:
I would like to find a TV/DVD combo in a preferred 22” class or a 19” class size. I want one that I can cut off the power pack and plug into the 12v lighter connection. Anyone have a suggestion for a model like that.
Thanks, MM
Click to expand...

Try Skyworth ... http://www.roadtrucker.com/electronics-4.htm - do not have one, but been thinking about getting one.
 
320Bob said:
Mike,
I had the 22" Toshiba TV/DVD combo installed on my previous boat with an AC connection. If you have an inverter you might consider this option since there are more named brand AC TVs to choose from than DC ones.
Click to expand...

Bob, I have a AC TV/DVD and inverter. Friends here taught me about the inefficiencies of inverters. It does seem silly to convert 12v DC to AC and then back again to power a TV. I hope to do it direct for times on the hook.

MM
 
MonacoMike said:
Bob, I have a AC TV/DVD and inverter. Friends here taught me about the inefficiencies of inverters. It does seem silly to convert 12v DC to AC and then back again to power a TV. I hope to do it direct for times on the hook.

MM
Click to expand...

Mike, I just did an install:

I just completed an install of a new TV/DVD player and Shakespeare SeaWatch 2025 antenna.


This is my system:
-Naxa 19” TV/DVD player.
-Articulating VESA wall mount
-Shakespeare SeaWatch 2025 Antenna
-Shakespeare 4365 Straight antenna mount


Naxa TV: Digital HD with built in DVD player. Comes with two power cords. One cord is for 12VDC and has an accessory plug on it. The other cord is for 120VAC and has a “brick” on it. I used the 12VDC cord, cutting the accessory plug off and direct wireing it to a 12V source. (Note: there is a fuse built into the accessory plug, so if you do as I did, you have to add a fuse in the power source line.


SeaWatch 2025 antenna: This antenna comes with an rf pre-amp. The pre-amp can be purchased separately for about 100 bucks.


My results: I first hooked the antenna cable directly to the TV and then took the boat out in the lake and did a channel scan. I was able to lock in nine (9) channels. Next, I wired in the rf pre-amp and took the boat out to the same spot in the lake. With the pre-amp I was able to lock in nineteen (19) channels. For reference purposes, I am on a lake which I would guess is about 30 miles out of Atlanta, GA and 40 miles from Rome, GA. I appear to be picking up all of the Atlanta and Rome stations. (Of course, reception is dependent on location)



Antenna Pros and Cons: I liked that the cable is fed to the antenna thru the antenna mounting pipe to the center of the antenna. This helps to shield the connector from the elements. I did not like that Shakespeare provided four (4) carriage bolts and lock nuts to secure the antenna to the mount. I would suggest that you purchase four(4) 1/4”x1” SS bolts and flat washers and use them instead of the carriage bolts. This is because the carriage bolt heads mate into the plastic female counterpart on the antenna mount and the plastic can easily be stripped out when trying to tighten down the bolts. Eliminate the problem up front by getting rid of the carriage bolts.​



Rf per-amp Pros and Cons: Pro:It can be wired for 12VDC or 120VAC operation. It can give you up to 20db gain and it does work! When it is on, it automatically selects the antenna as it's signal source. When turned off, it automatically selects dockside cable as it's signal source. It can be purchased separately and added to an existing antenna system. Con: It is large, unsightly and limited as to where it can be located. I would suggest to Shakespeare that they make a model that separates the gain control, on/off switch and indicator light out from the rf pre-amp. That way the rf pre-amp could be made a “black box” and mounted out of sight. The controls could then be be mounted on small face plate and mounted where they are convenient to the operator.​



Pictures:​






TV019.jpg


TV022.jpg


TV018.jpg

TV014.jpg


TV008.jpg


Here is the procedure to make that "bushing" install to make your job look neat:
Ok, you have to bring TV cable and a power cord thru that upholstered panel that the TV is mounted to. As you know, that makes a messy hole in the panel. To make that as clean as possible, I put a bushing in the hole to dress it up and to protect the wires.
Details:
- After deciding on the location, I drilled a small pilot hole.
- Then, I stuck the point of a 1" spade drill bit in the pilot hole and turned it while I made a trace of the circle. (You, of course, could do that with a compass)
- Using a sharp knife, I cut around the circle and removed the vinyl and backing material.
- Then, I drilled a 1" hole in the panel.
- I bought a bushing (specifics below) and forced it into the hole.
- Looks good, no ragged upholstry edges and the wires are protected.​


Specifics on the bushing:
- Home Depot SKU# 34481 06262 2
3/4" PVC Adapter (Electrical Dept)
ID is 3/4", OD is 1 1/16".
(So, you have to wiggle the spade drill around a little and tap the bushing in with ​
 
MonacoMike said:
Thanks, for the suggestions. Are the truckstop brands good quality compared to name brands?

Todd did you see if it had a power pack? I love Costco.

MM
Click to expand...

I don't recall. That was in Oct. Hell the way they rotate product that TV could be obsolete by now.
 
GrimmSpeed said:
ok, bad news, the 19" Insignia is straight 120v NOT 12v :(

Its too bad too because it is a perfect white color match for the cockpit area.

Justin
Click to expand...

I just found that out. I always look at the manual if it is available to see electrical connections. Thanks, MM
 
I bought a 22" combo just after Christmas. Dynnex. I took it to the boat last night and it worked great. Not to get it installed/mounted and completely hooked up.
MM I like the idea of using it on the hook. Thanks.
 
You must log in or register to reply here.

Forum statistics

Threads
113,248
Messages
1,429,276
Members
61,128
Latest member
greenworld
Back
Top