48 DA Owners Club

Don’t forget the converter to set it up with laptop. I put it in a previous post.
 
1EDF2D1A-6FEC-494F-B4BB-EAA5DB85F9D0.jpeg
 
I will be happy to ship you the usb converter if you need to borrow it.
 
Aml327 said:
I will be happy to ship you the usb converter if you need to borrow it.
Click to expand...
I ordered the 4” Maretron monitor, I was told you can do all the programming on it.
 
I've seen on different threads, and maybe on this one as well where guys have installed round screw in type access covers on the electrical panel in the engine room to have quick access to a breaker or two. I set out to copy that idea, and when I removed the cover I noticed there were quite a few breakers in there I might like to have access to. Anyway, I thought I'd share a couple pics of what I ended up going with. I can either just flip the door down to check/reset, or if needed just pull the whole door out just about as quickly.
932F28EB-568E-4795-9460-0A4A2940DB95.jpeg

B34BA415-7933-447C-A947-5E2BD649DE39.jpeg

I was able to source this through boatoutfitters.com
 
Last edited:
TNT8808 said:
I've seen on different threads, and maybe on this one as well where guys have installed round screw in type access covers on the electrical panel in the engine room to have quick access to a breaker or two. I set out to copy that idea, and when I removed the cover I noticed there were quite a few breakers in there I might like to have access to. Anyway, I thought I'd share a couple pics of what I ended up going with. I can either just flip the door down to check/reset, or if needed just pull the whole door out just about as quickly.
View attachment 98506
View attachment 98507
I was able to source this through boatoutfitters.com
Click to expand...
Damn.... That is slick. How do I order one? Do they have this on file to make one?
 
Curious if that dimension is standard across all models. Looks like a great option.
 
TNT8808 said:
Just to clarify...the dimensions I posted are for the cover I had built. The SR electrical box cover on my 2008 48DA is 19.5" x 17.5"
Click to expand...
I am going to pop mine off this weekend to check it out to see if I can go full size and replace the original front cover. I am curious as it is just a NEMA box so should just have a o-ring seal. Question is the seal embedded in the cover or the box?

I am also thinking to have one of these made for the sump that seals. Maybe with a clear plexiglass door. I bet they could make it to replace the whole original cover. Would sure make servicing it easier.
 
ocgrant said:
I am also thinking to have one of these made for the sump that seals. Maybe with a clear plexiglass door. I bet they could make it to replace the whole original cover. Would sure make servicing it easier.
Click to expand...

if they can do that in clear, i am in. Group discount maybe?
 
Shaps said:
if they can do that in clear, i am in. Group discount maybe?
Click to expand...
I am sure they can make this. I am thinking white frame with clear door.
 
I will take measurements this weekend and call them on Monday to get a $$$.
 
You must log in or register to reply here.

Forum statistics

Threads
113,118
Messages
1,426,552
Members
61,035
Latest member
Lukerney
Back
Top