Electrical Switch Pad

Sue Verrill

New Member
Jul 24, 2020
2
Boat Info
340 Sea Ray Sundancer 2003
Engines
8.1 Mercruiser
My husband and I are looking for a replacement electrical switch pad for our 2003 340 Sea Ray Sundancer. It appears it may have 2 different part numbers —- 1810625 or 1606581. I found one on eBay but it is sold out. It is the control panel on the left hand side of the control console. Wondering if anyone has had any luck finding one of these. We found a replacement for the entire console but it’s $3,700—yikes. Thanks
 
I have an 03 Sundancer 280. Believe the switch panels are the same for our boats. I have a new starboard panel onboard my boat that I bought in hopes of fixing a failed windlass control. Unfortunately for me, it was not the switch panel, but rather the EIM that is bad. (the replacement switch panel did not fix my problem.) So I have this one, and will sell it. It cost me 445 + shipping. You can have it for 400. Let me know.
 
I have an 03 Sundancer 280. Believe the switch panels are the same for our boats. I have a new starboard panel onboard my boat that I bought in hopes of fixing a failed windlass control. Unfortunately for me, it was not the switch panel, but rather the EIM that is bad. (the replacement switch panel did not fix my problem.) So I have this one, and will sell it. It cost me 445 + shipping. You can have it for 400. Let me know.
Do you still have this switch panel.
 
If you locate it I’m interested in buying it.
 
OK. I will be on the boat this weekend.
I hope it solves your problem, as mine is the EIM.
How was yours acting at the last. I’m thinking it might not be my problem.
 
How was yours acting at the last. I’m thinking it might not be my problem.
My problem was that the windlass controls were not acting right. The main power light would come on, but the windlass woudl not work. Or, I could not turn off the light. Bottom line, I could not operate the windlass from the help. I "think" I was able to use the foot switches. (Can't remember). We tried the new panel, nothing changed. Put the old one back and then created a separate windlass circuit. For the moment, all other switches are working (lights, water, stereo, etc)
 
It could be my pad, I’m having trouble with more than one thing.
 
My husband and I are looking for a replacement electrical switch pad for our 2003 340 Sea Ray Sundancer. It appears it may have 2 different part numbers —- 1810625 or 1606581. I found one on eBay but it is sold out. It is the control panel on the left hand side of the control console. Wondering if anyone has had any luck finding one of these. We found a replacement for the entire console but it’s $3,700—yikes. Thanks
I just went through this in August. I put the new FP Marine system in and it works great. I was having problems on the starboard side. My port side was working fine for now. This could be the EIM or the switch pad. I am not qualified to check this so i just replaced it. I do have the pad and EIM for the port side Part number 1606581
 
I replaced the pad, it corrected all my burnt out led issues but did not correct the functional issues. Th FP kit fixed everything
 
Yes I do. I need to dig it up, it is either on the boat or in my garage. PM me.
HI do you have the left switch wood panel? I really need it switch pad cover
 
I have an 03 Sundancer 280. Believe the switch panels are the same for our boats. I have a new starboard panel onboard my boat that I bought in hopes of fixing a failed windlass control. Unfortunately for me, it was not the switch panel, but rather the EIM that is bad. (the replacement switch panel did not fix my problem.) So I have this one, and will sell it. It cost me 445 + shipping. You can have it for 400. Let me know.
HI do you have the left switch wood panel? I really need it switch pad cover
 
I just went through this in August. I put the new FP Marine system in and it works great. I was having problems on the starboard side. My port side was working fine for now. This could be the EIM or the switch pad. I am not qualified to check this so i just replaced it. I do have the pad and EIM for the port side Part number 1606581
Hi
Do you still have the part 1606581, please?
 
Hi
I am currently trying to replace the switchpad, anyone has any good suggestions, how to remove the black stuff from the behind the board? Removed the rubber, but stuck with the back side...
2021-07-30 15.48.31.jpg
 

Forum statistics

Threads
112,942
Messages
1,422,697
Members
60,926
Latest member
dander88
Back
Top