Sc5000 or Mercury smartcraft system view faded screen

mikeygfly

New Member
Sep 24, 2018
14
Boat Info
1999 31' fountain
Engines
Twin Yamaha 250ox66
Not sure how much popularity I will get here but I am able to repair most all LCD displays. From Garmin chartplotters to Yamaha smart gauges. I have recently tried my luck with 3 separate vessel view displays and was successful in bringing it back to life. Message me or email at mikeygfly@comcast.net. Prices vary. I am located in SW Florida.
 

Attachments

  • IMG_20180825_184615.jpg
    IMG_20180825_184615.jpg
    107.5 KB · Views: 855
After repair
 

Attachments

  • Screenshot_20180925-201318_Gallery.jpg
    Screenshot_20180925-201318_Gallery.jpg
    62.1 KB · Views: 905
I'm in Daytona and have a vessel view that is going bad. What do you charge, what's the turnaround time and what guarantee do you provide?
 
I'm in Daytona and have a vessel view that is going bad. What do you charge, what's the turnaround time and what guarantee do you provide?
Hello Jimi, I charge 200 minus shipping (20). Turnaround time from Daytona is about a week. My guarentee is that there will be no defects in my replacement of components only, within 1 year of install.
 
Thanks. When I get down to this item on my gotta do list, I'll get in touch. Also have some Yamaha gauges in my Pathfinder I may want to talk to you about.
 
Just here to "bump" the thread. Still going strong here although I did raise my price this year to 250 per unit repair. Inquire within!
 

Attachments

  • inCollage_20190120_132417103.jpg
    inCollage_20190120_132417103.jpg
    160.4 KB · Views: 771
Not sure how much popularity I will get here but I am able to repair most all LCD displays. From Garmin chartplotters to Yamaha smart gauges. I have recently tried my luck with 3 separate vessel view displays and was successful in bringing it back to life. Message me or email at mikeygfly@comcast.net. Prices vary. I am located in SW Florida.
Just here to "bump" the thread. Still going strong here although I did raise my price this year to 250 per unit repair. Inquire within!
 
Have a fresh looking and working SmartCraft VesselView v1.5 for a QSC diesel display that just had the glare panel and display repaired by Eric Clayton (Gauge Saver). I just pulled from my 2005 420 Dancer. It should work with all early Cummins diesel boats from 2004-2007. First $1,000 gets it.

Smartview1.jpg Smartview2.jpg
 
Not sure how much popularity I will get here but I am able to repair most all LCD displays. From Garmin chartplotters to Yamaha smart gauges. I have recently tried my luck with 3 separate vessel view displays and was successful in bringing it back to life. Message me or email at mikeygfly@comcast.net. Prices vary. I am located in SW Florida.
 
Just found your info on club searay and I'm very interested in learning about repairingm sc. What info do you need from me: model#,serial, boat/ engi=
ne. What is turn around time, approx cost, etc. Also have repaired units st=
ayed visible for years. I have a local guy that says the repair only lasts =
a year and starts fading again.My
name is Al Reynolds, located near
Ft Lauderdale. I really look forward to hear from you. I can't afford to buy
a new VV !!
Btw: we share the same same birthday!!
 

Just found your info on club seats and I'm very interested in learning abou=
t repairing my sc. What info do you need from me: model#,serial, boat/ engi=
ne. What is turn around time, approx cost, etc. Also have repaired units st=
ayed visible for years. I have a local guy that says the repair only lasts =
a year and starts fading again.=C2=A0My name is Al Reynolds, located near f=
t Lauderdale. I really look forward to hear from you. I can't afford to buy=
a new VV !!
 
Hello Al, yes im sure I will be able to help you. Please give me a call at 2396714921 and we can discuss.
 
Have an sc5000 that will need redone or possible replaced. Gotta test and see if it’s functioning at all. Suggestions on what to verify before waisting your time sending it to you for repair
 
Have an sc5000 that will need redone or possible replaced. Gotta test and see if it’s functioning at all. Suggestions on what to verify before waisting your time sending it to you for repair
Hi best I can say is to turn it on and see what happens. Usually even the worst ones you can still tell when the unit is powered on and off. I have parts to replace if necessary. I do not charge for a failed or impossible repair. Only charge for a succesful repair. If your not sure you can always ship to me and I will evaluate. Photos sometimes help too. Reply here or call me at 2396714921 for further details.
 
Thank you. I’ll be picking up the boat next Friday so I’ll reach out once we sort it out
 
Mike, just out of curiosity, are you the same gentleman from gaugesaver.com? If so, I have heard lot's of good things about you through a Yamaha forum. If you are not him... well, this is the first I have heard of your service so no judgement one way or the other! :)
 
Mike, just out of curiosity, are you the same gentleman from gaugesaver.com? If so, I have heard lot's of good things about you through a Yamaha forum. If you are not him... well, this is the first I have heard of your service so no judgement one way or the other! :)
Hello lazy days. No that is not me although we both do have common ground in this niche market. We do have somewhat of a bussines relationship, but that's about it. He does good work as well and im reluctant to say he has a better website than me. I am located in sw Florida near Sanibel, Naples, Cape Coral. Water and boats are everywhere around my area!
 

Forum statistics

Threads
112,944
Messages
1,422,723
Members
60,927
Latest member
Jaguar65
Back
Top