QT1
Active Member
- Oct 20, 2016
- 649
- Boat Info
- 1990 350 Sundancer, "Quality Time II".
- Engines
- 454 Mercruisers, performance parts modified by PO.
Looks really cool on your boat
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature currently requires accessing the site using the built-in Safari browser.
Old, resurrected thread, but here's my aftermarket pulpit. Original teak was trimmed back to install this. An overhung pulpit looks way better than the OEM cutoff with the flap anchor sticking out. It has a 20kg (44lb) Bruce anchor with a Powerwinch 45' class windlass. Chain to rope. A bit overkill for a 340, but works flawlessly.
Before a new coat of teak oil:
A work of art!Old, resurrected thread, but here's my aftermarket pulpit. Original teak was trimmed back to install this. An overhung pulpit looks way better than the OEM cutoff with the flap anchor sticking out. It has a 20kg (44lb) Bruce anchor with a Powerwinch 45' class windlass. Chain to rope. A bit overkill for a 340, but works flawlessly.
Before a new coat of teak oil:
Where might I ask did you find the stainless online? Thanks.You can buy those plates online. They are stainless and are held on with butyl tape, bend by hand to the shape of your hull. I went with 48 inches, it worked with my setup, bit a little longer would also work. Width is dictated by the notch in the deck.
Are you talking about the bow protector?Where might I ask did you find the stainless online? Thanks.
I’m looking for a flat piece of SS to protect the deck from an anchor chain.Are you talking about the bow protector?
Thank you!Those stainless protectors come flat and you form them to the desired shape for your bost.