JVM225
Well-Known Member
JVM, by removing the support and reinstalling, do you get incredible vibration? Do you reinstall the screws? maintenance on the Gennie was a big PITA this year with that there and now that I see someone has removed it was just curious for future purposes.
Thx - Erik
No vibration problems because of the support.
Mine is secured with four Phillips head screws (2 on each end) secured in place with Nylock nuts and flat washers from the bottom.
That thing is held in there pretty tight and the Nylocks don’t loosen up.
Could your vibration be coming from one, or both, of the latches that hold the removeable deck panel over the generator in place?
If so, maybe you can tighten them up a bit.