2003 420DA Dash and Old Raymarine Electronics

HeyGirl03

New Member
Jun 19, 2017
11
New Smyrna Beach
Boat Info
420DA Sundancer 420
Engines
Cummins 6CTA
Hello,
I just completed the upgrade on my new dash and electronics, and wanted to sell the old existing dash and equipment. Here are a list of items that I have for sale. All equipment is in good working condition, however ST7001+, ST60 and RN300 have sunburn marks on there respective screens. I have pictures of everything verifying conditions. If you have any questions feel free to PM me.

Thanks!

RL 80 C

Smart Pilot X30 - ST7001+ - S100 - Not included is drive unit or Rudder Positioning Unit

Ray240 Radio - VHF Handheld - Speaker

ST60 - RN300 GPS instrument panel.

(3) Original wood-grain dash panels
 
Hey there. What’s your price for the RL80C and can you post some photos? Could be a good spare. Also, any chance that you can power it on or know what version firmware you have? Needs to be newer than 2.06 and can’t really find anyone that will update them anymore. One more question, how was it to remove it? Is it screws from behind? I ask because I have no idea how I’d get back there on my 01 380 DA. Thanks
 
Hey there. What’s your price for the RL80C and can you post some photos? Could be a good spare. Also, any chance that you can power it on or know what version firmware you have? Needs to be newer than 2.06 and can’t really find anyone that will update them anymore. One more question, how was it to remove it? Is it screws from behind? I ask because I have no idea how I’d get back there on my 01 380 DA. Thanks

Thanks for the reply! It was installed using two independent brackets. I provided pictures of it powered up, and what the bracket looks like from behind the dash panel. I do not have the power cable to check the firmware version unfortunately. I would be willing to sell for $350 Shipped?
Powered_RL80C.jpg
RL80C.jpg
RL80C_Mount.jpg
Powered_RL80C.jpg RL80C.jpg RL80C_Mount.jpg
 
HeyGirl03....I'd be interested in hearing about the new stuff you put in. Did you keep the original tachs and multi-gauges? Which chart plotter did you go with? Did you put in a completely new Auto-pilot system? Did you bring in engine data to new NMEA-2000 Network? Show us some pictures of your work! Did you do it yourself or have someone do it for you?

Can't wait to see the finished product.

Jaybeaux
 
Great Thread, did you look into any of the Simrad gear and its continuity?
 
Thanks for the reply. I’m going to pass on it, but much appreciated!

Thanks for the reply! It was installed using two independent brackets. I provided pictures of it powered up, and what the bracket looks like from behind the dash panel. I do not have the power cable to check the firmware version unfortunately. I would be willing to sell for $350 Shipped?View attachment 54348 View attachment 54349 View attachment 54350 View attachment 54348 View attachment 54349 View attachment 54350
 
Great Thread, did you look into any of the Simrad gear and its continuity?
I did but I was able to save a few extra dollars by utilizing the existing Raymarine drive unit and tiller sensor with the new raymarine autopilot. The new raymarine instruments and MFD’s are plug and play as well. Install was very simple.
 
HeyGirl03....I'd be interested in hearing about the new stuff you put in. Did you keep the original tachs and multi-gauges? Which chart plotter did you go with? Did you put in a completely new Auto-pilot system? Did you bring in engine data to new NMEA-2000 Network? Show us some pictures of your work! Did you do it yourself or have someone do it for you?

Can't wait to see the finished product.

Jaybeaux
Thanks, I did the install myself, and it was pretty simple giving Raymarines SeaTalk and Ethernet Hub intergration. I used the existing gauges and had tecnografic reconfigure the dash panels to incorporate a Axoim 9” and 12”MFD. i have the mechanical 6CTAs so I had to use 2 analog to NEMA converters to get any data to the MFDs. I was able to pull those analog signals from the Gauges which made it pretty simple. I want to find a way to get fuel burn, but that is on the back burner till I can find a way to get it from the fuel system. I upgraded the autopilot system but used the existing drive and tiller sensor which helped save a few dollars. I also went with the quantum dome radar rather then the open radar that was originally on the boat giving cost difference. I will try and snap a few pictures of the finished product this weekend.
 
Hello,
I just completed the upgrade on my new dash and electronics, and wanted to sell the old existing dash and equipment. Here are a list of items that I have for sale. All equipment is in good working condition, however ST7001+, ST60 and RN300 have sunburn marks on there respective screens. I have pictures of everything verifying conditions. If you have any questions feel free to PM me.

Thanks!

RL 80 C

Smart Pilot X30 - ST7001+ - S100 - Not included is drive unit or Rudder Positioning Unit

Ray240 Radio - VHF Handheld - Speaker

ST60 - RN300 GPS instrument panel.

(3) Original wood-grain dash panels
Do you still have the RayMarine 240 speaker for sale
 
What would you take for st7001+ control head? I just need it for internal parts so don’t care about the screen really.
 
HeyGirl
Definitely interested in the vhf speaker. Please text or call me (516)380-4733 to arrange payment
 

Forum statistics

Threads
112,943
Messages
1,422,704
Members
60,927
Latest member
Jaguar65
Back
Top